BRAND NEW - 1 HP - Glycol Bath Chiller Penguin Chiller

Description

Created with
Eselt
-
Responsive Templates for eBay Sellers
We Know Cold -- CONTACT US TODAY
Send us a message
Created with
Eselt
-
Responsive Templates for eBay Sellers
Our Store
Seller Profile
Feedback
Save this seller
Contact
Created with
Eselt
-
Responsive Templates for eBay Sellers
1 HP Glycol Chiller - PENGUIN CHILLERS
1 HP Glycol Chiller
Our glycol chiller allows users to achieve lower temperatures than our standard line of chillers. Our triple helix copper coil allows us to keep the setup small yet powerful. The glycol chiller is suitable for applications down to about 5F depending on the heat load. This makes it ideal for the brewing market, along with many other low temperature applications. The built in controller maintains the temperature of the glycol at the set point. Chiller can be used as a typical laboratory bath chiller or by using a submersible pump you can move the chilled glycol out to your equipment requiring cooling. There are 8 inlet and 8 outlet 3/8″ tubing fittings in the lid of the reservoir along with an addition hole to run the power cord for a pump through. The insulated reservoir holds 3 gallons of glycol.
Depending on application (desired operating temp/freeze point) you can use any combination of water/glycol you prefer. It’s typical for brewing applications to use about 40-50% glycol to water. On our testing down to -14 Fahrenheit we used a 50/50 mixture without any freezing issues. The chiller can be used on up to 8 fermenters at the same time.
This chiller is intended for maintaining fermentation temperatures or crash cooling. It is not recommended for dropping wort from boiling temps however. It is a common practice to either use a 2 stage system where the chiller pre-cools tap water that then cools the boiling wort, or tap water is used first to drop the temps down to about 100F, then switch over to using the chiller.
It is typical to use one pump per fermenter or vessel you wish to cool. In this type of setup each pump requires an individual controller to turn each pump on/off independently. The controller on the Glycol Chiller will regulate the temperature of the glycol (for example 28F), the controllers on the pumps would regulate the temperature of each vessel independently by regulating the flow of 28F glycol to that vessel.
All Penguin Chillers are proudly MADE IN AMERICA! By purchasing your unit directly from us, the U.S. manufacturer, we can continue offering you quality service throughout the life of your unit.
Penguin Chillers are constructed using only the highest quality materials. Our use of over-sized titanium coils provides the extra surface area needed for faster more efficient cooling and prevents leaching in salt water.
Visit
Penguin ChillersCom
for additional information on the Chillers we manufacture, the accessory packages we offer and
our extended warranty terms
before making your purchase.
115V / 7.2 A / 830W
1 Horsepower, 3 Gallon Resevoir
28″L x 19″W x17″H
59 dBA (Quiet)
5250 BTU @ 28F
95 lbs, 6ft power cord
1 year warranty
Proudly Built in USA
Created with
Eselt
-
Responsive Templates for eBay Sellers
Payment
We accept Visa, Mastercard, American Express and Discover.
Shipping
Shipping Information
Visit our website,
Penguin ChillersCom
,
for accurate shipping costs in the continental USA. Penguin Chillers also ships directly to Hawaii, Alaska, Puerto Rico, and Canada for an additional charge (Contact us for accurate quotes). If you are outside of these areas, you will need to hire a freight forwarding company.
Warranty Shipping Information
The customer is responsible for inbound shipping on a warranty claim. We can assist in providing a discounted return shipment label if requested by the customer, but the cost of shipping to Penguin Chillers falls under the responsibility of the customer. The chiller needs to be properly packaged for safe transport. This product must be insured during shipment. Customer assumes all risks of loss or damage during shipment. If the warranty claim is approved Penguin Chillers will repair or replace the chiller at our discretion, and then repackage and ship the chiller back to you at no additional cost within the continental 48 states, surcharges may apply outside of the continental 48 states.
Visit our website,
Penguin ChillersCom
,
for more information on our warranty terms and conditions.
Returns
Return Policy
Returns must be approved prior to shipping the return. Returns must be requested within 14 days of original shipment. All returned items must be in their original condition, with all original packaging. A 20% stocking fee applies to all approved returns. To return your product for refund, you will be responsible for paying your own shipping costs. Shipping costs are non-refundable. There are no refunds available on any custom made chillers.
Created with
Eselt
-
Responsive Templates for eBay Sellers
Links
Our Store
Seller Profile
Feedback
Save this seller
Contact
Newsletter
Don't miss any offers! We will inform you about our offers and promotions by email.
Subscribe to newsletter
Contact
Send us a message