Top-Grade 110V Vertical Pneumatic Punch Press Machine Pneumatic Milling Machine

Description

Document
Product Description
Features & Details
【HIGH ACCURACY】 - Theoretical Output Pressure: 1121-1962 N / 114-200 kg, Pressure: 441 lbs / 200 kg. Our machine is a small precision pressure equipment, equipped with high accuracy rotational resistance guide rod and guide plate, will adapt to high-speed precision impact load.
【HUMANIZED DESIGN】 - Can be used with both hand buttons and footswitch control, increase the protection device. Heating mode, temperature control and pressure sensors, and pre-control devices comply with the International standards to ensure operating safety.
【SIMPLE OPERATION】 - Our cylinder adopts a double sealing structure with good sealing performance and a high power conversion rate. It is easy to install, easy to operate, no noise when the hydraulic system and the generated electric standby.
【QUICK ADJUSTMENT】 - According to different products and modes, adjust the height of speed, stroke, pressure, and stamping time. Operation pressure easily adjustable from 0.4-0.7 Mpa according to the requirement.
【WIDELY APPLICABLE】 - Compressed air as a power source, high efficiency, and can reduce labor. Our machine is suitable for electronics, electrical appliances, instruments, meters, cameras, watches, jewelry, hardware, clothing, shoes and hats industries, etc.
Operation
Pressure
Theoretic
Pressure
Mpa
kg/cm²
psi
N
kg
0.4
4
110
1121
114
0.5
5
120
1402
143
0.6
6
130
1682
172
0.7
7
140
1962
200
Key Features
Highly Sealed Cylinder
Cylinder diameter 2.5" / 63 mm, the maximum stroke of 2.95" / 75 mm, adjustable range of 2" / 50 mm. Adopt a two-way sealing design, good sealing effect, high power conversion rate.
Hand Buttons & Footswitch
Use manual control of stamping, with a footswitch to start work, double protection device, safe and reliable operation. The footswitch cord is 6 ft / 1.8 m long and easy to use.
Precision Design
Rotate the height adjustment handle to adjust the height of the body easily. The solenoid valve has high precision and sensitivity and can operate at a high frequency for a long time.
T-groove Base
Pneumatic presses with a 9" x 6" size T-shaped groove HT200 cast iron base, wear durability, securely mounted. It is easy to install various molds, and it is very convenient to install and disassemble.
Air Source Processor
Precision instruments can be any combination of decomposition to meet the different needs of air. And the oil cup polymeric material, heat sealing performance, impermeable airtight.
Multifunctional Use
Pneumatic punching machine is used for pattern hot stamping and can combine workpieces, punching, bending, riveting, extrusion, forming, punching, etc.
Top-Grade Vertical Pneumatic Punch Press Machine
Our pneumatic press uses high-performance cylinders, no noise in the hydraulic system or under standby status. Use high accuracy rotational resistance guide rod and guide plate. Saves electricity consumption and lowers production cost.
Note: Theoretical Output Pressure: 1121-1962 N / 114-200 kg, the actual output is about 80% theoretical output.
High Accuracy
Humanized Design
Simple Operation
Quick Adjustment
Widely Applicable
Specifications
Voltage: 110V AC
Power Source: Pneumatic
Operation Pressure: 0.4-0.7 Mpa (4-7 kg/cm², or 110-140 PSI)
Theoretical Output Pressure: 1121-1962 N / 114-200 kg
Actual Output: About 80% Theoretical Output
Die Hole Diameter: 0.63" / 16 mm
Depth of Throat and Mouth: 5.3" x 5.9" / 135 x 150 mm
Stroke: 5.9" x 5.3" / 150 x 135 mm
Tracheal Size: 0.31" x 0.2" / 8 x 5 mm
Adjustable Cylinder Size: 2.5" x 2.95" / 63 x 75 mm
Control Form: Manual
Layout Form: Vertical
Gross Weight: 39.3 lbs / 17.8 kg
Package Dimensions: 26.4" x 13.4" x 13.4" / 67 x 34 x 34 cm
Package Content
1 x Pneumatic Punch Press Machine
1 x Foot Pedal
1 x Manual
Ballscrew Bearing Blocks
Optical Axis Guide
Linear Actuator
Linear Actuator
Ball Screw Set
Ball Screw Set
Mold
BK17+BK17
T16/T20
HGH20
SBR25
SFE1616
SFU2505
Material
Gcr15 steel
Gcr15 steel
Gcr15 steel
Gcr15 steel
Bearing Steel
Bearing Steel
Optional Diameter
20mm/25mm
16mm/20mm
20mm
25mm
16mm
25mm
Optional Length
/
200mm-1200mm
200mm-2000mm
530mm-1200mm
650mm-1500mm
1600mm/1800mm
SHIPPING
ABOUT US
PAYMENT
RETURNS
CONTACT
WARRANTY
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
California Warehouse: City of Industry, CA
Texas
Warehouse
:  Houston, TX
Kentucky
Warehouse
: Hebron, KY
New Jersey
Warehouse
: Perth Amboy, NJ
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
Top-Grade Vertical Pneumatic Punch Press Machine
Our pneumatic press uses high-performance cylinders, no noise in the hydraulic system or under standby status. Use high accuracy rotational resistance guide rod and guide plate. Saves electricity consumption and lowers production cost.
Note: Theoretical Output Pressure: 1121-1962 N / 114-200 kg, the actual output is about 80% theoretical output.
High Accuracy
Humanized Design
Simple Operation
Quick Adjustment
Widely Applicable
Key Features
Highly Sealed Cylinder
Cylinder diameter 2.5" / 63 mm, the maximum stroke of 2.95" / 75 mm, adjustable range of 2" / 50 mm. Adopt a two-way sealing design, good sealing effect, high power conversion rate.
Hand Buttons & Footswitch
Use manual control of stamping, with a footswitch to start work, double protection device, safe and reliable operation. The footswitch cord is 6 ft / 1.8 m long and easy to use.
Precision Design
Rotate the height adjustment handle to adjust the height of the body easily. The solenoid valve has high precision and sensitivity and can operate at a high frequency for a long time.
T-groove Base
Pneumatic presses with a 9" x 6" size T-shaped groove HT200 cast iron base, wear durability, securely mounted. It is easy to install various molds, and it is very convenient to install and disassemble.
Air Source Processor
Precision instruments can be any combination of decomposition to meet the different needs of air. And the oil cup polymeric material, heat sealing performance, impermeable airtight.
Multifunctional Use
Pneumatic punching machine is used for pattern hot stamping and can combine workpieces, punching, bending, riveting, extrusion, forming, punching, etc.
Specifications
Voltage: 110V AC
Power Source: Pneumatic
Operation Pressure: 0.4-0.7 Mpa (4-7 kg/cm², or 110-140 PSI)
Theoretical Output Pressure: 1121-1962 N / 114-200 kg
Actual Output: About 80% Theoretical Output
Die Hole Diameter: 0.63" / 16 mm
Depth of Throat and Mouth: 5.3" x 5.9" / 135 x 150 mm
Stroke: 5.9" x 5.3" / 150 x 135 mm
Tracheal Size: 0.31" x 0.2" / 8 x 5 mm
Adjustable Cylinder Size: 2.5" x 2.95" / 63 x 75 mm
Control Form: Manual
Layout Form: Vertical
Gross Weight: 39.3 lbs / 17.8 kg
Package Dimensions: 26.4" x 13.4" x 13.4" / 67 x 34 x 34 cm
Package Content
1 x Pneumatic Punch Press Machine
1 x Foot Pedal
1 x Manual
Ballscrew Bearing Blocks
Optical Axis Guide
Linear Actuator
Linear Actuator
Ball Screw Set
Ball Screw Set
Mold
BK17+BK17
T16/T20
HGH20
SBR25
SFE1616
SFU2505
Material
Gcr15 steel
Gcr15 steel
Gcr15 steel
Gcr15 steel
Bearing Steel
Bearing Steel
Optional Diameter
20mm/25mm
16mm/20mm
20mm
25mm
16mm
25mm
Optional Length
/
200mm-1200mm
200mm-2000mm
530mm-1200mm
650mm-1500mm
1600mm/1800mm
Features & Details
【HIGH ACCURACY】 - Theoretical Output Pressure: 1121-1962 N / 114-200 kg, Pressure: 441 lbs / 200 kg. Our machine is a small precision pressure equipment, equipped with high accuracy rotational resistance guide rod and guide plate, will adapt to high-speed precision impact load.
【HUMANIZED DESIGN】 - Can be used with both hand buttons and footswitch control, increase the protection device. Heating mode, temperature control and pressure sensors, and pre-control devices comply with the International standards to ensure operating safety.
【SIMPLE OPERATION】 - Our cylinder adopts a double sealing structure with good sealing performance and a high power conversion rate. It is easy to install, easy to operate, no noise when the hydraulic system and the generated electric standby.
【QUICK ADJUSTMENT】 - According to different products and modes, adjust the height of speed, stroke, pressure, and stamping time. Operation pressure easily adjustable from 0.4-0.7 Mpa according to the requirement.
【WIDELY APPLICABLE】 - Compressed air as a power source, high efficiency, and can reduce labor. Our machine is suitable for electronics, electrical appliances, instruments, meters, cameras, watches, jewelry, hardware, clothing, shoes and hats industries, etc.
Operation
Pressure
Theoretic
Pressure
Mpa
kg/cm²
psi
N
kg
0.4
4
110
1121
114
0.5
5
120
1402
143
0.6
6
130
1682
172
0.7
7
140
1962
200
SHIPPING
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748
Texas
Warehouse
: 300 W Airtex Blvd, Suite 200, Houston, TX 77090
Kentucky
Warehouse
: 2125 Gateway Blvd, Hebron, KY 41048
New Jersey
Warehouse
: 1000 High Street, Perth Amboy, NJ 08861
ABOUT US
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
PAYMENT
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
RETURNS
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
CONTACT
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
WARRANTY
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.