Waterproof SUMP PUMP ALARM LED 12V DC Battery Well Overflow High Water Outdoor

Description

12 volt battery operation with optional smart three stage battery charger.
Long Float Wire Cord Sump Alarm SMPA1-12 Indoor/Outdoor High Water Alarm with 10 foot 12 Volt line cord, 12-foot Float cord, Flashing LED Light and Tonal Alarm.
The case is waterproof with rubber seals. F
or Septic / Sump / Pond & Other Applications.
Monitor your outdoor pump or Septic System Level from a remote location. A visually and audibly notification when a pump is non-operational. The alarm will sound when a high water or pump failure situation occurs.
Applications Include: Septic Systems - Outdoor Sump Pump Alarm / Crawl Space Pump Failure - Outdoor Sump Pump Monitor / Septic Pump Failure Alarm - Swimming Pool Sump Pump Monitor / Sump Pump Alarm System - Sump Pump Failure Alarm / Sump Pump Failure Warning - Sump Pump Alert
When a high level alarm condition exists, flashing red light and 80 db tonal alarm become active. Place the float by your pump water well, mount the alarm unit, plug in the unit, and the installation is complete. The alarm unit can be up to 10 feet away from the Battery or battery bank. Your choice of terminations-
alligator
clips, 3/4" ring terminals, or 3/8" ring terminals.
Contact
us after you buy with your choice, and we will terminate them or you. Otherwise you will receive all three sets for your own
installation
.
Features:
Includes sump alarm counter weigh. 12 foot ( 4 meter) float cord.
DC line cord 10 ft. with your choice of terminations
AC trickle charger, three stage with 10 line cord.
Waterproof Alarm unit- Wall or panel mount.
Has (2) rear mounting holes for mounting
Includes wall anchors for head unit, zip ties for floats, and instructions
Mercury Free Float Switch is suitable for use with potable water.
It can be used in sump pumps, water tanks, lift stations, low density oils and sewage water.
Unit is wired for high level alarm, but can be reversed for low level alarm.
How it the alarm works:
The alarm has a float on a line cord. On the line cord there is an adjustable weight. The weight slides on the cord and is placed in the well at the level you want the alarm to sound. The float switch is hanging below the weight. When the liquid rises to the maximum level of the float switch activates the alarm. This indicates that the liquid has reached an alarm point indicating pump failure.